Check
Confirm the flight controller, firmware, and current setup before you fly.
Turn a Blackbox log into a clear tune review. Compare measured results with AI-recommended values and choose what to do next.
Compare your current tune with the recommended values before deciding.
Confirm the flight controller, firmware, and current setup before you fly.
Save the current settings before TuneFPV prepares any change.
Follow the guided test flight while your radio remains in control.
Compare the results, Betaflight values, and AI recommendation. You decide what to keep.
TuneFPV does not automatically upload your Blackbox logs or controller configuration.
You choose what is shared for AI review.You fly with your radio and Betaflight as usual. TuneFPV reviews the recording after you land.
Save aircraft profiles, revisit previous values, and reopen past sessions without mixing one quad with another.
Keep every flight controller, aircraft setup, backup, and tuning session together.
GEPRCF405 · PID 0 / Rate 0
MATEKF405 · PID 0 / Rate 0 · 5 sessions
Keep the airframe, motor, battery, weight, payload, and notes with the aircraft they describe.
Compare the controller values, flight setup, results, and recommendations from earlier sessions.
Open, resume, export, or delete a session while keeping its aircraft and flight results together.
TuneFPV takes you through each step and shows what will change before anything is applied.
Open the guided workflowConfirm the firmware, active profiles, logging setup, and readiness for the guided flight.
TuneFPV creates and verifies a complete backup before preparing any controller change.
Follow the Roll, Pitch, and Yaw prompts with your radio, then reconnect after landing.
Compare the measured flight, Betaflight result, and AI-recommended values before choosing your next step.
Each value is clearly labeled so you always know where it came from.
The values and firmware on the connected flight controller.
The settings and response data captured during the Blackbox flight.
Clear tuning values based on the recorded flight and AI review.
Fly with your radio and Betaflight as usual. TuneFPV reviews the Blackbox recording after you land.
TuneFPV shows recommendations first. Nothing is applied without your confirmation.
Your current settings are saved and verified before TuneFPV prepares an update.
The AI review receives a prepared summary, never your Blackbox file or controller backup.
The AI reviews flight results and recommends values. It cannot connect to or change your aircraft.
Follow the guided workflow with an aircraft, or begin with a log you already recorded.
Use a supported desktop browser to connect directly to your flight controller.
Direct connectionConnect through the bridge when direct USB access is not available.
Works with more browsersReview an existing flight log without connecting an aircraft first.
Start from a saved flightMeasure the flight, compare the recommendations, and keep control of every decision.
Open TuneFPVNo. TuneFPV shows you the recommended values first. You choose whether to prepare and validate any change.
Yes. Each aircraft keeps its own profile, previous values, flight results, and tuning sessions.
Yes. You can reopen, resume, export, or delete earlier sessions and compare their saved values.
No. The AI review receives only the prepared flight summary you approve, never the Blackbox file or controller backup.
Guided tuning currently supports conventional open-prop quads with 3–5 inch props. You can also review compatible Blackbox logs without creating an aircraft profile.
You need a connection to sign in and request an AI review. Controller and file workflows continue to guide you when AI is unavailable.
Connect your aircraft or choose a Blackbox log, then compare clear recommendations before changing anything.